Imaxrc® The most professional manufacturer of balance charger in China.

B6AC PLUS Compact Charger

 


  B6AC PLUS Compact Charger Introduction

This charger charges 2S to 6S LiPo and 1 to 15 cell NiMH battery packs with just the press of a button. Everything is automatic, so there’s no complicated guesswork. You get a safe, high-quality charge every time. It’s the easiest charger you’ll ever use!

 B6AC PLUS Compact Charger Connections

1.Connect the charger to its power source, using either the AC power cord or the DC power cord provided. When connected to power, the charger will make a single audible tone and the LiPo Status LED will illuminate green.
When connecting to a DC power source, make sure to observe connect polarity-red to positive and black to negative. Do not connect both power inputs to the charger at the same time!
2.Plug the output power adapter cord into the output power ports of the charger, making sure to observe correct polarity (red to red and black to black).
3.Plug your battery into the output power adapter cord. If you’re charging a LiPo battery, plug its balance connector into the matching balance port on the charger, too.
Depending on the power connector on your battery, you may need to use an adapter or change the connector to match. In addition, if your LiPo battery does not feature an XH balance connector, an adapter board can be used.

 B6AC PLUS Compact Charger Features

1.Automatic detection of battery cell count and capacity.
2.Automatically sets charge output.
3.Integrated cell voltage balancer for Lipo batteries.
4.Highly accurate LiPo Balance Charging+/-0.01V
5.High-power, high performance charge circuit.
6.XH-Style LiPo balance ports.

 
  B6AC PLUS Compact Charger Specifications

Power Input Voltage: DC 11 to 18V/AC 100 to 240V
LiPo Charge Rate: Up to 6.0 Amps (80 Watts Max)
NiMH Charge Rate: Up to 6.0 Amps (80 Watts Max)
Power Output: 80 Watts
Charge Rate: Up to 1.5C
Battery Type: LiPo 2S to 6S (Series)/NiMH 1 to 15 Cells

  B6AC PLUS Compact Charger INCLUDES

iMaxRC B6AC Compact Charger*1
AC Input Cord*1, DC Input Cord*1
Output Cord*1
Instruction manual*1

  B6AC PLUS Compact Charger OPTIONAL PART
B35 power supply B20 power supply
 B6AC PLUS Compact Charger Warnings

1.Only use the charger with LiPo or NiMH battery types. Do not attempt to charge any other battery type. This charger is not compatible with LiFe, Lilo or NiCd batteries.
2.Observe any cautions and warnings included with your battery.
3.Never leave the charger unsupervised during use. If any malfunction is observed, immediately terminate the process.
4.Keep the charger away from moisture, dust, dirt, heat, direct sunlight and vibration. Do not drop it.
5.The charger is designed to be powered by an 11 to 18V DC or 100 to 240V AC power source only. Do not connect both power inputs to the charger at the same time!
6.Double-check all connections prior to starting the charge process. Do not connect with reverse polarity.
7.The charger and the battery to be charged should be placed on a heat-resistant, non-flammable and non-conductive surface. Never place them on a car seat, carpet or similar. Keep flammable and volatile materials well away from the operating area.
8.When charging LiPo batteries, we suggest using a LiPo charging safety bag, available from most hobby retailers.
9.Never charge a LiPo battery that is swollen in any way.
10.To avoid short-circuits between the output power adapter cord input connectors, always connect the adapter cord to the charger first and only then to the battery to be charged. Reverse the sequence when disconnecting.

All kinds of plugs as follows

EUR PLUG UK PLUG Australia PLUG America PLUG Swiss PLUG Japan PLUG
I420001 I420004 I420011 I420007 I420015 I420010